Red Dot Sight for Compact Handguns: Canik TP9 Elite SC, Sig Sauer 365XL, Ruger Max9, FNH Reflex MRD, Springfield Hellcat OSP/PRO

About this item

• ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89"
• For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.
• Show more
• Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
• Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
• Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
• ADE Nuwa is manual activated by pressing the on/off switch. Press and Hold switch for 2 seconds to turn on/off, quick press to adjust the brightness from low to high.
• Designed for compatibility with the Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, METE MC9, FNH Reflex MRD, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS (not suitable for standard Glock 43X/48 models that aren't MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W M&P9 EZ, S&W M&P Shield Plus Performance Center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate, or any handgun/mounting plate/slide featuring an RMS/RMSC screw pattern/footprint.
• ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
• Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.